Hydraulic Ram Tipper Kit Heavy Duty!

NO REDUCED MATERIAL IN PRODUCTION, MEANS A MORE HEAVY DUTY RAM

ADR Compliant and made to Australian Standards

Order Includes:
1 x Hydraulic Ram 800mm Stroke 4 Stage rated 4500kg

1 x Hose and Fittings

1 x Remote

1 x 12V Pump Tank

THE CONSTRUCTION:

• Only high-quality steel producers are accepted as our strategic suppliers (such as Dalmine and Mannesmann)
• All stages and outer tubes are manufactured exclusively from seamless steel-tube with a high yield point (RS 48 kg/mm²) and high tensile strength (R 65 kg/mm²)
• Our stages are roll-hardened for exceptional smoothness. This feature, along with the use of special bushes, ensures a clearance of no more than 0.07mm between stages is achieved – a vital aspect in resisting side-loads and bending factors.

• The internal and external “rolling" burnishing process for all stages and outer tubes, increases seal performance and life, resulting in more reliable and long-lasting products.
• A solid-stage design and absence of stop-limiting rings is an unsurpassed solution. Our design, with stop contact faces machined directly from solid tube, without welds, provides maximum safety and service life. (B3 models)

SPECIFICATIONS:

• Tipping hoists are designed as a lifting device only, for longitudinal-axis loads. They must not be used as a structural member or be subject to side load.
• Allowable hydraulic-oil temperature range is -40°C to +80°C. • Maximum duration of extension is 2 hours.
• The overall dimensions of the pump (Black box plus head) is 620x185x160mm approximately.
• The dimensions of the black box alone is 380x185x160mm approximately
• please allow for 5-20mm for manual measurements of all items
• dimensions of the ram can be seen in the photos attached!

If you have any queries please contact us via eBay message

We thank you for considering Autocrave Australia and look forward to dealing with you soon.